Characterization of domestic wastewater at Bhubaneswar, Odisha, India
Keywords:
Domestic wastewater, Bhubaneswar, Physicochemical parametersAbstract
Domestic wastewater is the major sources of water pollution in India. In the present study, an attempt has been made to collect the wastewater from three important locations at Bhubaneswar, the capital city of Odisha and characterise through analysis of different physico chemical parameters. The overall colour was light black and odour was unpleasant in all the three sampling stations. The average pH in all the three stations varied between 6.45-7.28, TSS(mg/L) 245.75-342.25, TDS(mg/L) 628.3-791.3, turbidity(NTU) 64.25-89.5, chloride(mg/L) 388.3-689.1, oil and grease(mg/L) 2.17-3.77, TKN(mg/L) 7.21-8.61, total hardness(mg/L) 277.5-329.7, BOD(mg/L) 108-139, COD(mg/L) 266.3 – 310.3, alkalinity(mg/L) 58.75-73.5, Na(mg/L) 77-79, K(mg/L) 17.5-25.6, sulphates(mg/L) 202.8-227.1, sulphide(mg/L) 0.933-1.12, phosphate(mg/L) 1.82-2.62, Fe(mg/L) 1.6-2.44, Cu(mg/L) 0.017-0.036, Zn(mg/L) 0.05-0.07 and chromium(mg/L) 0.019-0.041. Out of the different parameters studied, TSS, BOD and COD are above the permissible limit for disposal of wastewater into inland surface water. Though the metals present in the wastewater are within the limit, it may cause biomagnification when discharged into aquatic environment. Therefore, careful dilution and/or appropriate treatment methods may be adopted before the wastewater is discharged into outside environment.
