Greenhouse intensity of pollutants removal for wastewater plant applying different treatment technologies

Authors

  • Debashis Raha Fellow in Chemical and Environmental Engineerring (Engineers AUSTRALIA) P. G. Department of Environmental Sciences, Sambalpur University, Jyoti Vihar – 768 019, Odisha, INDIA Author
  • P. C. Mishra Fellow in Chemical and Environmental Engineerring (Engineers AUSTRALIA) P. G. Department of Environmental Sciences, Sambalpur University, Jyoti Vihar – 768 019, Odisha, INDIA Author

Keywords:

Greenhouse emissions, Suspended solids, BOD, COD, Total nitrogen, Total phosphorus, Energy

Abstract

Demand for urban water supply is increasing at an unprecedented rate worldwide. Diminishing quantity and quality of freshwater due to climate change, unsustainable freshwater extraction, population growth and pollution of fresh water resources, is driving demand for water recycling from wastewater teatment plants (WWTPs) and from other sources. By 2030, 67% of world population may not have adequate sanitation, which is a basic human right under the UN Charter. Poor sanitation is responsible for one-tenth of global disease. Sanitation and water recycling requires removing pollutants such as suspended solids (SS), biochemical oxygen demand (BOD), chemical oxygen demand (COD), oil and grease (O and G), total nitrogen (TN), total phosphorus (TP) and pathogens from wastewater. Intensity of energy consumption (GJ/ ML) and greenhouse emissions (tonne CO2-e/ ML) in wastewater treatment and in removing said six priority pollutants are studied for 12 different wastewater technologies at 19 WWTPs. Sequential batch reactor (SBR) and Modified Ludzak - Ettinger (MLE) biological nutrient removal (BNR) technology provides low energy and greenhouse emissions intensity, while delivering high quality effluent for beneficial recycling. For every $100,000 in energy cost, SBR BNR can remove 2,509 tonne of pollutants, compared to membrane bioreactor BNR of 168 tonne. This research shows that the energy or greenhouse emissions associated with removal of one tonne of total phosphorus can remove between 2 to 8 tonne of total nitrogen, 3 to 27 tonne of oil and grease, 16 to 66 tonne of BOD, 17 to 224 tonnes of total suspended solids and 44 to 165 tonne of COD, depending upon the technology used. Therefore, based upon specific pollutants removal requirements, an appropriate lower energy and carbon- intensive wastewater technology can be selected that produces an effluent quality fit for particular recycle or reuse application or for disposal to environment.

Downloads

Published

2013-01-01

Issue

Section

Articles

How to Cite

Greenhouse intensity of pollutants removal for wastewater plant applying different treatment technologies. (2013). The Ecoscan, 367-375. https://theecoscan.org/index.php/ECOSCAN/article/view/87

Similar Articles

11-20 of 41

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)