Removal of malachite green from aqueous solution using activated charcoal
Keywords:
Malachite green, Activated carbon, Kinetics, Adsorption isothermAbstract
Textile industry is the second largest source of water pollution in the world and pollution of water by use of dyes is a widespread phenomenon. Malachite green is a synthetic aromatic dye widely used by the textile industry of India and has been most often associated with aquatic pollution. This paper reports the ability of activated charcoal, a cheaply prepared adsorbent, to remove malachite green from aqueous solutions by varying the amount of adsorbent, pH, temperature, contact time and dye concentration in batch adsorption studies. It was found that adsorption increased with increasing pH upto 8 and temperature up to 50ºC and equilibrium was achieved within 90 minutes of contact time between activated charcoal and malachite green. More than 99% of the dye could be removed by using only 500 mg activated charcoal per litre of dye. Adsorption data of malachite green onto activated charcoal could be described by the first order kinetic model and fitted will in theFreundlich adsorption isotherm. Using the Freundlich isotherm, the absorption capacity of activated charcoal was found to be 133.89 ug1-1/nml1/ng-1 at 30°C and hence is a promising low cost material for removal of dyes from waste water.
